Farmall 90 Manual page 44

44
20. Detach the fuel pipe assembly (1) from the injec-
tors.
21. Remove the fuel outlet pipe (2) from the injectors
removing the screw (3) and the seal (4).
22. Remove the screws (2) and the turbine (1).
23. Remove the exhaust manifold (3).
24. Remove the belt (3, fig. 60) of the auxiliary mem-
bers by loosening the tightener.
25. Remove the alternator (6), fan pulley (2). and
tightener (8). Remove the support (1) of the
pulley (2) and the oil cooler (7).
26. Remove the coolant pump (5).
27. Remove the engine cooling system fitting (4)
from the crankcase.
NOTE: The coolant pump (5) cannot be overhauled.
It must be replaced if there is any irregular operation.
SECTION 10 - - ENGINE - - CHAPTER 1
MIF1108A
MIF1109A
MIF1110A
58
59
60