Farmall 90 Manual page 52

52
55. Remove the thermostat valve (2) from the gover-
nor body (1) taking out the screws (3).
56. Take out the screws (1) securing the connecting
rod caps (2) and remove them.
57. Extract the pistons together with the connecting
rods from the top of the crankcase.
NOTE: Keep the half bearings in their respective
housings since, if they are used, they must be
mounted in the position found upon disassembly.
58. Remove the rings (1) from the piston (3) with the
pliers 380000221 (2).
SECTION 10 - - ENGINE - - CHAPTER 1
MIF1124A
MIF0938A
MIF0950A
82
83
84