37. Before removing the injection pump, do the tim-
ing and lock the engine flywheel with cylinder
no. 1 at T.D.C. as shown on page 100, using tools
380000988 and 380000732. Then loosen the
bolt (2), remove the "L" spacer (1) and lock the
screw (2) in order to keep the pump in time with
the engine flywheel.
NOTE: Keep the "L" spacer with the pump casing.
38. Remove the three nuts (2) (3) (5) securing the in-
jection pump (1) to the crankcase (4) and extract
it from its housing.
39. Remove the screws (2) fixing the engine flywheel
(1) to the crankshaft.
SECTION 10 - - ENGINE - - CHAPTER 1
MIF0920A
MIF0922A
MIF1115A
47
67
68
69