Setting A Remote Ui Pin - Canon LBP352 User Manual

Setting a Remote UI PIN

You can set a PIN for access to the Remote UI. All users use a common PIN.
● When Department ID Management is enabled, setting here is not required.
Management(P. 256)
1
Press (
2
Use / to select <Network>, and press
● When a message appears, press
3
Select <Remote UI Settings>
4
Select <On>, and press
5
Select <Remote UI Access PIN>, and press
6
Set a PIN.
● Enter up to 7 digits and press
● As <Confirm PIN> is displayed for confirmation, enter again the same PIN digits.
If Remote UI settings are initialized
● The Remote UI Access PIN is also initialized. After an initialization, reset the PIN.
LINKS
Setting Access Privileges(P. 252)
Setting the System Manager Password(P. 253)
).
.
<RUI Access Sec. Set.>.
.
.
Security
.
.
263
0X7U-03Y
Setting the Department ID
Initializing Menu(P. 551)