Adjust The Contour Offset During Navigation - Humminbird i-Pilot Link Operation Manual

heading line
(green)
land

Adjust the Contour Offset During Navigation

The Contour Offset can be adjusted while Follow the Contour navigation is in progress.
Touch Screen
1. Tap Chart in the status bar. Select Go To.
2. Select Follow the Contour.
3. Select Contour Offset. Drag the slider, or press and
hold the slider, to adjust the setting.
To remove the offset, set the offset to 0 (off).
WARNING! Contour Offset does NOT account for changes in water depth. It is important to be aware of depth variations in your
current location and selected navigation route, and adjust the Contour Offset as needed.
Follow the Contour
Follow the Contour Navigation (ONIX)
Keypad
1. Press the GO TO key.
2. From the Go To menu, select Follow the Contour.
3. Select Contour Offset. Turn the Rotary dial, or press
and hold the ENTER key, to adjust the setting.
To remove the offset, set the offset to 0 (off).
106
i-Pilot Link
status icon
(enabled
and actively
navigating)
projected
route (gray)
selected
contour line
(black)