Stop Itrack Recording - Humminbird i-Pilot Link Operation Manual

Stop iTrack Recording

Use the following instructions to stop recording an iTrack and save it (or discard it). When you save an iTrack, it is saved with an
alphanumeric name that starts with IT. The name can be edited from the Nav Data Tool (see Manage your i-Pilot Link Navigation
Data).
Stop iTrack Recording (Go To Menu)
Use the following instructions to stop iTrack recording using the Go To menu.
Touch Screen
1. Tap Chart in the status bar. Select Mark.
2. Tap the Record iTrack on/off button to turn Record
iTrack OFF.
3. Save or Discard: Follow the on-screen prompts to save
the iTrack.
Stop iTrack Recording (X-Press Remote)
Use the following instructions to stop iTrack recording using the X-Press Remote.
Touch Screen
1. Open the X-Press Remote: Tap the top, right corner of
the status bar. Tap the remote.
2. Tap the Record button.
Gray = Off
3. Save or Discard: Follow the on-screen prompts to save
the iTrack.
iTracks
Keypad
1. Press the MARK key.
2. Select Record iTrack.
3. Press the ENTER key to turn Record iTrack OFF.
4. Save or Discard: Follow the on-screen prompts to save
the iTrack.
Keypad
1. Open the X-Press Remote: Press the POWER key.
Select the remote.
2. Select the Record button. Press the CHECK/ENTER key.
Gray = Off
3. Save or Discard: Follow the on-screen prompts to save
the iTrack.
90