Navigate A Saved Route - Humminbird i-Pilot Link Operation Manual

Navigate a Saved Route

Use the cursor to select a saved route point on the Chart View, and you can start navigation to it. The i-Pilot Link will navigate the
route in forward or reverse, depending on your selection.
Touch Screen
1. Tap a waypoint icon or route point.
2. Tap Chart in the status bar. Select Go To.
OR
Tap the Go To button on the X-Press Remote.
3. Select Go To: Route or Go To: Point.
4. To start navigation, turn on the i-Pilot Link prop.
Cancel Navigation: Tap Chart in the status bar. Select
Go To > Cancel Navigation.
NOTE: See Propeller Controls for more details about turning the prop on or off and setting the prop speed.
boat icon
heading line
(green)
Routes
Keypad
1. Use the Joystick to move the cursor to a waypoint or
2. Press the GO TO key.
3. Select Go To: Route or Go To: Point.
4. To start navigation, turn on the i-Pilot Link prop.
Navigating a Saved Route on the Chart View (ONIX)
116
route point.
Cancel Navigation: Press the GO TO key. Select Cancel
Navigation.
i-Pilot status
icon (enabled
and actively
navigating)
route end
point