Turn On I-Pilot Sync - Humminbird i-Pilot Link Operation Manual

6

| Turn On i-Pilot Sync

Turn on i-Pilot Sync to upload saved iTracks and Spot-Locks from the i-Pilot Link. When i-Pilot Sync is turned On, saved iTracks and
Spot-Locks from the i-Pilot Link are transferred to the SOLIX, ONIX, or ION, and saved iTracks and Spot-Locks from the SOLIX, ONIX,
or ION control head are transferred to the i-Pilot Link. Data will be transferred when you power on the SOLIX, ONIX, or ION, as well
as any time new data is created on the i-Pilot unit or the SOLIX, ONIX, or ION.
NOTE: If there is not enough available memory space on the control head, an error message will display and data will not be
transferred until more space is created on the Humminbird control head. See your control head operations manual for information
about managing navigation data.
NOTE: For more information about exporting navigation data, see Manage your i-Pilot Link Navigation Data.
Turn On i-Pilot Sync
1. Press the HOME key.
2. Select the Nav Data tool. Tap the icon, or press the ENTER key, to open.
3. Under Options, select i-Pilot Sync.
4. Tap the on/off button, or press the ENTER key, to turn it on.
OR
Tap to Select
Turning On i-Pilot Sync
Select
23
Confirm
Configuration