Install A Map Card - Humminbird i-Pilot Link Operation Manual

Opening the i-Pilot Arrival Submenu
4

| Install a Map Card

Use a Humminbird map card to provide detailed maps, depth contours, etc. on the chart views. To use Follow the Contour, an i-Pilot
Link-compatible Humminbird map card must be installed and selected as the map source.
i-Pilot Link Compatible Map Cards: Humminbird LakeMaster, LakeMaster PLUS, AutoChart ZeroLine, and ChartSelect.
1. Install an i-Pilot compatible map card.
See your control head operations guide for installation details.
2. The control head will select the map source automatically. To change the map source manually, select Settings > Chart.
WARNING! Do not leave the SD slot cover open. The slot cover should always be closed to prevent water damage to the unit.
OR
Tap to Select
Setting the i-Pilot Arrival Mode
Select
21
Confirm
Configuration