Cancel Navigation (Disengage); Move A Saved Itrack - Humminbird i-Pilot Link Operation Manual

Cancel Navigation (Disengage)

Cancel Navigation (Go To Menu)
Use the following instructions to cancel navigation using the Go To menu.
Touch Screen
1. Tap Chart in the status bar.
2. Select Go To.
3. Select Cancel Navigation.
Be prepared to take manual control of the boat!
Cancel Navigation (X-Press Remote)
Touch Screen
1. During iTrack navigation, open the X-Press Remote:
Tap the top, right corner of the status bar. Tap the
remote.
2. Tap the iTrack button to turn off iTrack.
Yellow = On, Gray = Off
Be prepared to take manual control of the boat!

Move a Saved iTrack

Use the following instructions to move the position of a saved iTrack on the Chart View. This feature is not available using the X-Press
Remote.
Move a Saved iTrack in the Chart View
Touch Screen
1. Tap the Start Point icon or End Point icon on the iTrack.
2. Tap the iTrack name.
3. From the iTrack Info menu, select Move.
4. Tap a position on the chart where you want to move the
iTrack to.
5. Save: Tap the check icon in the status bar to save the
iTrack at the new position.
Cancel: Tap the X icon.
Keypad
1. Press the GO TO key.
2. Select Cancel Navigation.
3. Press the ENTER key.
Be prepared to take manual control of the boat!
Keypad
1. During iTrack navigation, open the X-Press Remote:
Press the POWER key. Select the remote.
2. Select the iTrack button.
3. Press the ENTER key to turn off iTrack.
Yellow = On, Gray = Off
Be prepared to take manual control of the boat!
Keypad
1. Use the Joystick to move the cursor to the Start Point
icon or End Point icon on the iTrack.
2. Press the ENTER key.
3. From the iTrack Info menu, select Move.
4. Use the Joystick to move the cursor to the new
position on the chart.
5. Save: Press the ENTER key to save the iTrack at the
new position.
Cancel: Press the EXIT key.
95 iTracks