Navigate In Circle Mode - Humminbird i-Pilot Link Operation Manual

Navigate in Circle Mode

You can start Circle Mode at the vessel position or the cursor position. During Circle Mode navigation, you can also use Cruise Control
(see Cruise Control).
Start Circle Mode at the Vessel Position
You can start Circle Mode at the boat position using the Go To menu or the X-Press Remote. Before proceeding, confirm the cursor
is not active.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat when Circle mode is engaged. If the boat does not move, confirm the prop is turned on in the menu system
(see Propeller Controls).
Start Circle Mode at the Vessel Position (Go To Menu)
Use the following instructions to start Circle Mode at the boat position using the Go To menu.
Touch Screen
1. Tap Chart in the status bar.
2. Select Go To.
3. Select Circle.
Adjust the Radius (optional): Select Radius. Drag the
slider, or press and hold the slider.
4. Select Navigation Direction: Select Clockwise or
Counterclockwise.
Cancel Navigation: Tap Chart in the status bar. Select
Go To > Cancel Navigation.
selected
direction
circle size
Circle Mode
Selecting a Direction for Circle Mode at the Boat Position (SOLIX)
Keypad
1. Press the GO TO key.
2. Select Circle. Press the ENTER key.
Adjust the Radius (optional): Select Radius. Turn the
Rotary dial, or press and hold the ENTER key.
3. Select Navigation Direction: Select Clockwise or
Counterclockwise. Press the ENTER key.
Cancel Navigation: Press the GO TO key. Select Cancel
Navigation. Press the ENTER key.
80
direction
preview
(yellow =
clockwise)