Start Spot-Lock Navigation - Humminbird i-Pilot Link Operation Manual

Start Spot-Lock Navigation

You can quickly Spot-Lock at the current boat position or the cursor position, and start navigation towards it automatically. This type
of Spot-Lock is temporary, and unless you save it, the Spot-Lock will be deleted when you start a new mode of navigation. To save
a Spot-Lock, see Mark and Save a Spot-Lock.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the Spot-Lock location. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).
Engage Spot-Lock at the Boat Position
You can Spot-Lock at the current boat position using the Go To menu or the X-Press Remote. Before proceeding, confirm the
cursor is not active.
Engage Spot-Lock at the Boat Position (Go To Menu)
Use the following instructions to engage a Spot-Lock at the boat position using the Go To menu.
Touch Screen
1. Tap Chart in the status bar.
2. Select Go To.
3. Select Spot-Lock.
Navigation will start automatically.
Cancel Navigation/Disengage Spot-Lock: Tap Chart in
the status bar. Select Go To > Cancel Navigation.
Canceling navigation will delete the Spot-Lock.
Spot-Locks
Keypad
1. Press the GO TO key.
2. Select Spot-Lock.
3. Press the ENTER key.
Navigation will start automatically.
Cancel Navigation/Disengage Spot-Lock: Press the
GO TO key. Select Cancel Navigation. Canceling
navigation will delete the Spot-Lock.
58