Humminbird i-Pilot Link Operation Manual page 69

Move the Active Spot-Lock (X-Press Remote)
Use the following instructions to move an active Spot-Lock within 5 feet of its current position using the X-Press Remote.
Touch Screen
1. Open the X-Press Remote: Tap the top, right corner of
the status bar. Tap the remote.
2. Tap the Spot-Lock button to turn Spot-Lock ON.
3. Tap the left, right, up, or down arrows to move the
Spot-Lock.
Tap Arrows to Move
Keypad
Moving an Active Spot-Lock using the X-Press Remote
propeller on
Spot-Lock On
OR
69
1. Open the X-Press Remote: Press the POWER key.
Select the remote.
2. Select the Spot-Lock button.
3. Press the ENTER key to turn Spot-Lock ON.
4. Select the left, right, up, or down arrows. Press the
ENTER key to move the Spot-Lock in the selected
direction.
propeller speed
move Spot-Lock
Select an Arrow Move
Spot-Locks