Start Follow The Contour Navigation - Humminbird i-Pilot Link Operation Manual

Start Follow the Contour Navigation

You can start i-Pilot Link navigation if the boat position is within 1/4 mile of the selected contour. During navigation, the direction
can be changed using Reverse under the Follow the Contour menu.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust to
move the boat to the contour. If the boat does not move, confirm the prop is turned on in the menu system (see Propeller Controls).
NOTE: If you cannot select a contour because it is displayed under AutoChart Live or Bottom Layer, see Follow Bottom Hardness
or Vegetation.
1. Select a Contour Line in the Chart View
Touch Screen
1. Press and hold a position on a contour line.
2. Select Go To > Follow the Contour.
Proceed to Set the Contour Offset.
Using the Touch Screen to Select a Contour Line (ONIX)
Press and Hold to Select
Keypad
1. Use the Joystick to move the cursor to select a contour
line.
2. Select Go To > Follow the Contour.
Proceed to Set the Contour Offset.
Using the Joystick to Select a Contour Line (ONIX)
OR
Select
103 Follow the Contour