Humminbird i-Pilot Link Operation Manual page 56

Mark a Spot-Lock at the Cursor Position
You can use the cursor to mark a Spot-Lock location. To start navigation, see Start Spot-Lock Navigation.
Touch Screen
1. Tap a position on the chart to activate the cursor.
2. Tap Chart in the status bar.
3. Select Mark.
4. Select Spot-Lock.
active cursor position
Tap to Activate the Cursor
Tap to Select
Spot-Locks
Creating a Spot-Lock at the Cursor Position (ONIX)
OR
Move the Joystick
to Activate the Cursor
Keypad
1. Use the Joystick to move the cursor to a position on
the chart.
2. Press the MARK key.
3. Use the Joystick to select Spot-Lock.
4. Press the ENTER key.
Open Menu
56
Select Confirm