Humminbird i-Pilot Link Operation Manual page 62

Engage Spot-Lock at the Cursor Position
Engage Spot-Lock at the Cursor Position (Go To Menu)
Use the following instructions to start Spot-Lock navigation at the cursor position from the Go To menu. Engaging a Spot-Lock at
the cursor position is not available on the X-Press Remote.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the Spot-Lock location. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).
Touch Screen
1. Press and hold a position on the chart.
2. Select Go To.
3. Select Spot-Lock.
Navigation will start automatically.
Cancel Navigation/Disengage Spot-Lock: Tap Chart in
the status bar. Select Go To > Cancel Navigation.
Canceling navigation will delete the Spot-Lock.
Using the Joystick to Select the Spot-Lock Position (ONIX)
cursor
Press and Hold
Tap to Select
Spot-Locks
OR
Select
Keypad
1. Use the Joystick to select a position on the chart.
2. Press the GO TO key.
3. Select Spot-Lock.
4. Press the ENTER key.
Navigation will start automatically.
Cancel Navigation/Disengage Spot-Lock: Press the
GO TO key. Select Cancel Navigation. Canceling
navigation will delete the Spot-Lock.
Navigating to the Spot-Lock (ONIX)
Spot-Lock name end point
Go To
62
start point
Select Confirm