Navigate To A Saved Spot-Lock - Humminbird i-Pilot Link Operation Manual

Navigate to a Saved Spot-Lock

If a saved Spot-Lock is within 1/4 mile of the boat position, you can start navigation towards it. Spot-Lock will engage automatically
when the boat reaches the destination Spot-Lock.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the Spot-Lock location. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).
Select a Saved Spot-Lock in Chart View
Touch Screen
1. Tap a Spot-Lock icon on the chart.
2. Tap Chart in the status bar.
3. Select Go To.
4. Select Spot-Lock.
Navigation will start automatically.
Cancel Navigation/Disengage Spot-Lock: Tap Chart in
the status bar. Select Go To > Cancel Navigation.
Spot-Lock name
boat icon
Selecting a Saved Spot-Lock in Chart View (ONIX)
OR
Tap to Select
Keypad
1. Use the Joystick to select a Spot-Lock icon on the chart.
2. Press the GO TO key.
3. Select Spot-Lock.
4. Press the ENTER key.
Navigation will start automatically.
Cancel Navigation/Disengage Spot-Lock: Press the
GO TO key. Select Cancel Navigation.
Select
63
Go To
Spot-Locks