Configure I-Pilot With The Control Head; Enable I-Pilot Link Navigation - Humminbird i-Pilot Link Operation Manual

C P
-
ONFIGURE i ILOT WITH THE
Use the instructions in this section to set up i-Pilot on the Humminbird control head.
1

| Enable i-Pilot Link Navigation

To start i-Pilot Link navigation from the SOLIX, ONIX, or ION, i-Pilot Navigation must be turned on. When i-Pilot Navigation is turned
on, the related i-Pilot Link menus will be added to the menu system.
If i-Pilot Navigation is turned off, your SOLIX, ONIX, or ION control head will operate with its traditional Humminbird navigation
features.
NOTE: If i-Pilot Link is connected during navigation, navigation will automatically be canceled. See Installation: Confirm i-Pilot
Link Installation and Connection on the Humminbird Control Head.
Enable i-Pilot Link Navigation
1. Press the HOME key. Select Settings.
2. Select Navigation.
3. Under i-Pilot Options, select i-Pilot Navigation.
4. Tap the on/off button, or press the ENTER key, to turn i-Pilot Navigation ON.
C
ONTROL
Turning On i-Pilot Link Navigation
OR
Tap to Select
H
EAD
Select
19
i-Pilot options menu
Confirm
Configuration