Humminbird i-Pilot Link Operation Manual page 87

When Navigate to Start or Navigate to End is initiated, Link will navigate to the nearest track point. Once this nearest track point is
reached, it will then follow the track points in sequence back to either the Start Point or End Point, based on the selected mode.
Once the end or start track point is reached, Link automatically cancels the iTrack navigation. You can choose to have Link transition
to other modes by configuring the Arrival Mode (see Configure i-Pilot with the Control Head: Set the Arrival Mode).
87
RECORDED iTRACK
NAVIGATE iTRACK
TOWARDS START POINT
NAVIGATE iTRACK
TOWARDS END POINT
iTracks