Reverse Direction During Itrack Navigation - Humminbird i-Pilot Link Operation Manual

Select and Navigate the Last Saved iTrack
Before proceeding, confirm the cursor is not active.
Touch Screen
1. Tap Chart in the status bar. Select Go To.
2. Select Last Saved iTrack.
3. From the menu, select one of the following options:
To navigate to the iTrack Start Point, select Go To
Start.
To navigate to the iTrack End Point, select Go To End.
4. To start navigation, turn on the i-Pilot Link prop.
Cancel Navigation: Tap Chart in the status bar. Select
Go To > Cancel Navigation.
NOTE: See Propeller Controls for more details about turning the prop on or off and setting the prop speed.

Reverse Direction During iTrack Navigation

If you are navigating a saved iTrack, you can quickly change the navigation direction toward the Start Point or End Point. For example,
if the i-Pilot Link is navigating to the Start Point, selecting Reverse will start i-Pilot Link navigation in the opposite direction, towards
the End Point.
Touch Screen
1. Tap Chart in the status bar. Select Go To.
2. Select Reverse.
Cancel Navigation: Tap Chart in the status bar. Select
Go To > Cancel Navigation.
NOTE: See Propeller Controls for more details about turning the prop on or off and setting the prop speed.
iTracks
Keypad
1. Press the GO TO key.
2. Select Last Saved iTrack. Press the ENTER key.
3. From the menu, select one of the following options:
To navigate to the iTrack Start Point, select Go To
Start.
To navigate to the iTrack End Point, select Go To End.
4. To start navigation, turn on the i-Pilot Link prop.
Cancel Navigation: Press the GO TO key. Select Cancel
Navigation.
Keypad
1. Press the GO TO key.
2. Select Reverse.
3. Press the ENTER key.
Cancel Navigation: Press the GO TO key. Select Cancel
Navigation.
94