Convert A Waypoint To A Spot-Lock; Delete A Saved Waypoint In The Chart View - Humminbird i-Pilot Link Operation Manual

Start Navigation to a Saved Waypoint in Chart View
Touch Screen
1. Tap a waypoint icon on the chart.
2. Tap Chart in the status bar. Select Go To.
3. Select Go To: Point.
4. To start navigation, turn on the i-Pilot Link prop.
Cancel Navigation: Tap Chart in the status bar. Select
Go To > Cancel Navigation.
NOTE: See Propeller Controls for more details about turning the prop on or off and setting the prop speed.

Convert a Waypoint to a Spot-Lock

To convert a waypoint position to a Spot-Lock, see Spot-Locks: Convert a Waypoint to a Spot-Lock in Chart View.
NOTE: When the waypoint is converted to a Spot-Lock, the following menu options are disabled: icon editing, waypoint avoidance,
and depth marker.

Delete a Saved Waypoint in the Chart View

Touch Screen
1. Tap a waypoint icon on the chart.
2. Tap the Waypoint Name.
3. Select Delete.
NOTE: You can also delete saved waypoints from the Nav Data tool. See Manage your i-Pilot Link Navigation Data for more
information.
Waypoints
Keypad
1. Use the Joystick to move the cursor to a waypoint icon.
2. Press the GO TO key.
3. Select Go To: Point.
4. To start navigation, turn on the i-Pilot Link prop.
Cancel Navigation: Press the GO TO key. Select Cancel
Navigation.
Keypad
1. Use the Joystick to move the cursor to a waypoint icon.
2. Press the ENTER key.
3. Select Delete.
4. Press the ENTER key.
78