Record An Itrack - Humminbird i-Pilot Link Operation Manual

Record an iTrack

When you are ready to record an iTrack, iTrack recording can be initiated from the Mark menu in the Chart View or from the X-Press
Remote.
When Record iTrack is turned on, iTrack recording will begin from the current vessel position, and will automatically stop when a
2 mile distance is achieved. The boat must already be moving when iTrack recording is initiated.
To stop iTrack recording, turn Record iTrack off.
Start iTrack Recording (Go To Menu)
Use the following instructions to record an iTrack using the Go To menu.
Touch Screen
1. Tap Chart in the status bar. Select Mark.
2. Tap the Record iTrack on/off button to turn Record
iTrack ON.
Turn Record iTrack ON.
Tap to Open Mark Menu
Tap to Select
iTracks
Keypad
1. Press the MARK key.
2. Select Record iTrack.
3. Press the ENTER key to turn Record iTrack ON.
Starting iTrack Recording (ONIX)
OR
Open Mark Menu
88
saved iTrack
Start Point will be marked
at the boat's current
position when iTrack
Recording is initiated.
Select Confirm