Xconfiguration Networkservices Welcometext; Peripherals Configuration; Xconfiguration Peripherals Profile Cameras - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration NetworkServices WelcomeText

Choose which information the user should see when logging on to the codec through Telnet/
SSH.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration NetworkServices WelcomeText:
where
WelcomeText
: Off/On
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
WelcomeText
xCommand

Peripherals configuration

xConfiguration Peripherals Profile Cameras

Define the number of cameras that are expected to be connected to the video system. This
information is used by the video system's diagnostics service. If the number of connected
cameras does not match this setting, the diagnostics service will report it as an inconsistency.
Requires user role: ADMIN, INTEGRATOR
Default value: Minimum1
USAGE:
xConfiguration Peripherals Profile Cameras:
where
Cameras
: NotSet/Minimum1/0/1/2/3/4/5/6/7
NotSet: No camera check is performed.
Minimum1: At least one camera should be connected to the video system.
0-7: Select the number of cameras that are expected to be connected to the video
system.
80
API Reference Guide
xStatus Appendices
Cameras
Copyright © 2017 Cisco Systems, Inc. All rights reserved.