Xconfiguration Networkservices Http Mode; Xconfiguration Networkservices Http Proxy Allowed; Xconfiguration Networkservices Http Proxy Loginname; Xconfiguration Networkservices Http Proxy Password - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration NetworkServices HTTP Mode

Define whether or not to allow access to the video system using the HTTP or HTTPS (HTTP
Secure) protocols. Note that the video system's web interface use HTTP or HTTPS. If this
setting is switched Off, you cannot use the web interface.
If you need extra security (encryption and decryption of requests, and pages that are returned
by the web server), allow only HTTPS.
Requires user role: ADMIN
Default value: HTTP+HTTPS
USAGE:
xConfiguration NetworkServices HTTP Mode:
where
Mode
: Off/HTTP+HTTPS/HTTPS
Off: Access to the video system not allowed via HTTP or HTTPS.
HTTP+HTTPS: Access to the video system allowed via both HTTP and HTTPS.
HTTPS: Access to the video system allowed via HTTPS, but not via HTTP.

xConfiguration NetworkServices HTTP Proxy Allowed

The HTTP Proxy Settings are available from the user interface when the system is provisioned
to Cisco Spark. The HTTP proxy settings makes it possible to onboard a video system behind a
HTTP proxy to Spark.
Requires user role: ADMIN, USER
Default value: True
USAGE:
xConfiguration NetworkServices HTTP Proxy Allowed:
where
Allowed
: False/True
False: The HTTP proxy settings are not available from the Cisco Spark setup wizard.
True: The HTTP proxy settings are available from the Cisco Spark setup wizard.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
Mode
Allowed
xCommand

xConfiguration NetworkServices HTTP Proxy LoginName

This is the user name part of the credentials for authentication towards the HTTP proxy.
Requires that the NetworkServices HTTP Proxy Mode is set to Manual.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration NetworkServices HTTP Proxy LoginName: "LoginName"
where
LoginName
: String (0, 80)
The authentication login name.

xConfiguration NetworkServices HTTP Proxy Password

This is the password part of the credentials for authentication towards the HTTP proxy.
Requires that the NetworkServices HTTP Proxy Mode is set to Manual.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration NetworkServices HTTP Proxy Password: "Password"
where
Password
: String (0, 64)
The authentication password.
75
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.