Xcommand Conference Speakerlock Set; Diagnostics Commands; Xcommand Diagnostics Run - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xCommand Conference SpeakerLock Set

For manually locking one of the speakers to the prominent speaker position. This overrides the
default voice switching.
Requires user role: ADMIN, USER
USAGE:
xCommand Conference SpeakerLock Set Target:
where
Target: local/remote
Identifies local or remote participant.
CallId: Integer (0..65534)
Identify CallID for the remote participant. Only relevant if Target is set to "remote". The
default is set to 0.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration
Target [CallId: CallId]
xCommand xCommand

Diagnostics commands

xCommand Diagnostics Run

This command runs self-diagnostics commands on the system.
Requires user role: ADMIN
USAGE:
xCommand Diagnostics Run [ResultSet: ResultSet]
where
ResultSet: Alerts/All/None
You can filter the diagnostics results to alerts, all or none. If not set, the result will show
all results. The default is set to Alerts.
132
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.