Xcommand Systemunit Optionkey Removeall; Xcommand Systemunit Signinbanner Clear; Xcommand Systemunit Signinbanner Get; Xcommand Systemunit Signinbanner Set - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xCommand SystemUnit OptionKey RemoveAll

Remove all option keys.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit OptionKey RemoveAll Confirm:
where
Confirm: Yes

xCommand SystemUnit SignInBanner Clear

Clear the sign in banner set with xCommand SystemUnit SignInBanner Set.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit SignInBanner Clear

xCommand SystemUnit SignInBanner Get

Get the custom message set with xCommand SystemUnit SignInBanner Set.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit SignInBanner Get
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration
Confirm
xCommand xCommand

xCommand SystemUnit SignInBanner Set

Set a sign in banner with a custom message on the system's user interface.
Use:
xCommand SystemUnit SignInBanner Set <enter>
Banner text <enter>
. <enter>
Requires user role: ADMIN
USAGE:
xCommand SystemUnit SignInBanner Set

xCommand SystemUnit SoftReset

Reset most parameters to their default values. This does not include parameters associated
with room setup, such as camera position, language, and volume.
Requires user role: ADMIN, USER
USAGE:
xCommand SystemUnit SoftReset Confirm:
where
Confirm: Yes
154
API Reference Guide
xStatus Appendices
Confirm
Copyright © 2017 Cisco Systems, Inc. All rights reserved.