Download  Print this page

Networkservices Welcometext; Networkservices Wifi Allowed; Networkservices Wifi Enabled; Networkservices Xmlapi Mode - Cisco DX70 Administrator's Manual

Hide thumbs

Advertisement

Cisco DX70 and DX80
Introduction

NetworkServices WelcomeText

Choose which information the user should see when logging on to the codec through
Telnet/SSH.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.

NetworkServices Wifi Allowed

Video systems that have a built-in Wi-Fi adapter, can connect to the network either via
Ethernet or Wi-Fi. Both Ethernet and Wi-Fi are allowed by default, and the user can choose
which one to use from the user interface. With this setting, the administrator can disable
Wi-Fi configuration, so that it cannot be set up from the user interface.
The systems support the following standards: IEEE 802.11a, IEEE 802.11b, IEEE 802.11g,
and IEEE 802.11n. The system supports the following security protocols: WPA-EAP-PEAP,
WPA-EAP-TLS, WPA-EAP-TTLS, WPA-EAP-FAST, WPA-EAP-MSCHAPv2, WPA-EAP-GTC,
WPA-PSK (AES), WPA2-PSK (AES), and open networks (not secured).
If the PID (Product ID), found on the rating label at the rear of the video system, contains the
letters NR (No Radio) the system does not support Wi-Fi.
Requires user role: ADMIN, USER
Default value: True
Value space: False/True
False: Wi-Fi cannot be used. You must connect to the network via Ethernet.
True: Both Ethernet and Wi-Fi are allowed.
D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration
Peripherals
Maintenance

NetworkServices Wifi Enabled

Provided that the video system is allowed to connect to the network via Wi-Fi (see the
NetworkServices WIFI Allowed setting), you can use this setting to enable and disable Wi-
Fi.
You cannot use Ethernet and Wi-Fi at the same time. If you try to configure Wi-Fi while an
Ethernet cable is connected, you must unplug the Ethernet cable to proceed. If you connect
an Ethernet cable while connected to Wi-Fi, Ethernet will take precedence. If you unplug
the Ethernet cable, the video system will automatically connect to the last connected Wi-Fi
network, if available.
Requires user role: ADMIN, USER
Default value: True
Value space: False/True
False: Wi-Fi is disabled.
True: Wi-Fi is enabled.

NetworkServices XMLAPI Mode

Enable or disable the video system's XML API. For security reasons this may be disabled.
Disabling the XML API will limit the remote manageability with for example TMS, which no
longer will be able to connect to the video system.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The XML API is disabled.
On: The XML API is enabled (default).
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
97
Administrator Guide
System settings
System settings
Appendices

Advertisement

Table of Contents

This manual is also suitable for:

Dx80

Comments to this Manuals

Symbols: 0
Latest comments: