Xconfiguration Networkservices Telnet Mode; Xconfiguration Networkservices Welcometext; Peripherals Configuration; Xconfiguration Peripherals Profile Touchpanels - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xConfiguration NetworkServices Telnet Mode

Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration NetworkServices Telnet Mode:
where
Mode
: Off/On
Off: The Telnet protocol is disabled. This is the factory setting.
On: The Telnet protocol is enabled.

xConfiguration NetworkServices WelcomeText

Choose which information the user should see when logging on to the codec through Telnet/
SSH.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration NetworkServices WelcomeText:
where
WelcomeText
: Off/On
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration xConfiguration
Mode
WelcomeText
xCommand

Peripherals configuration

xConfiguration Peripherals Profile TouchPanels

Define the number of touch panels that are expected to be connected to the video system. This
information is used by the video system's diagnostics service. If the number of connected touch
panels does not match this setting, the diagnostics service will report it as an inconsistency.
Note that only one Cisco Touch controller is supported in this version.
Requires user role: ADMIN
Default value: NotSet
USAGE:
xConfiguration Peripherals Profile TouchPanels:
where
TouchPanels
: NotSet/Minimum1/0/1/2/3/4/5
NotSet: No touch panel check is performed.
Minimum1: At least one touch panel should be connected to the video system.
0-5: Select the number of Touch controllers that are expected to be connected to the
video system.
66
API Reference Guide
xStatus Appendices
TouchPanels
Copyright © 2016 Cisco Systems, Inc. All rights reserved.