Macros Configuration; Xconfiguration Macros Mode; Xconfiguration Macros Autostart; Network Configuration - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

Macros configuration

xConfiguration Macros Mode

Macros allow you to write snippets of JavaScript code that can automate parts of your video
endpoint, thus creating custom behavior. Use of macros is disabled by default, but the first
time you open the Macro Editor you will be asked whether to enable use of macros on the
codec. Use this setting when you want to manually enable, or to permanently disable the use
of macros on the codec. You can disable the use of macros within the Macro Editor. But this
will not permanently disable macros from running, because every time the codec is reset the
macros will be re-enabled automatically.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Macros Mode:
Mode
where
Mode
: Off/On
Off: Permanently disable the use of macros on this video system.
On: Enable the use of macros on this video system.

xConfiguration Macros AutoStart

All the macros run in a single process on the video endpoint, called the macro runtime. It should
be running by default, but you can choose to stop and start it manually. If you restart the video
system, the runtime will automatically start again if auto start is enabled.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Macros AutoStart:
where
AutoStart
: Off/On
Off: The macro runtime will not start automatically after a restart of the video system.
On: The macro runtime will start automatically after a restart of the video system.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
AutoStart
xCommand

Network configuration

xConfiguration Network [1] DNS Domain Name

The DNS Domain Name is the default domain name suffix which is added to unqualified names.
Example: If the DNS Domain Name is "company.com" and the name to lookup is
"MyVideoSystem", this will result in the DNS lookup "MyVideoSystem.company.com".
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Network n DNS Domain Name: "Name"
where
n
: Index that identifies the network. Range: 1..1
Name
: String (0, 64)
The DNS domain name.

xConfiguration Network [1] DNS Server [1..3] Address

Define the network addresses for DNS servers. Up to three addresses may be specified. If the
network addresses are unknown, contact your administrator or Internet Service Provider.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Network DNS Server
n
where
n
: Index that identifies the network. Range: 1..1
m
: Index that identifies the DNS server. Maximum three DNS servers are allowed. Range: 1..3
Address
: String (0, 64)
A valid IPv4 address or IPv6 address.
64
API Reference Guide
xStatus Appendices
Address: "Address"
m
Copyright © 2017 Cisco Systems, Inc. All rights reserved.