Xconfiguration Network [1] Ieee8021X Password; Xconfiguration Network [1] Ieee8021X Anonymousidentity; Xconfiguration Network [1] Ieee8021X Eap Md5; Xconfiguration Network [1] Ieee8021X Eap Ttls - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration Network [1] IEEE8021X Password

Define the password for 802.1X authentication.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Network n IEEE8021X Password: "Password"
where
n
: Index that identifies the network. Range: 1..1
Password
: String (0, 50)
The password for 802.1X authentication.

xConfiguration Network [1] IEEE8021X AnonymousIdentity

The 802.1X Anonymous ID string is to be used as unencrypted identity with EAP (Extensible
Authentication Protocol) types that support different tunneled identity, like EAP-PEAP and
EAP-TTLS. If set, the anonymous ID will be used for the initial (unencrypted) EAP Identity
Request.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Network IEEE8021X AnonymousIdentity: "AnonymousIdentity"
n
where
n
: Index that identifies the network. Range: 1..1
AnonymousIdentity
: String (0, 64)
The 802.1X Anonymous ID string.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration xCommand

xConfiguration Network [1] IEEE8021X Eap Md5

Define the Md5 (Message-Digest Algorithm 5) mode. This is a Challenge Handshake
Authentication Protocol that relies on a shared secret. Md5 is a Weak security.
Requires user role: ADMIN, USER
Default value: On
USAGE:
xConfiguration Network n IEEE8021X Eap Md5:
where
n
: Index that identifies the network. Range: 1..1
Md5
: Off/On
Off: The EAP-MD5 protocol is disabled.
On: The EAP-MD5 protocol is enabled (default).

xConfiguration Network [1] IEEE8021X Eap Ttls

Define the TTLS (Tunneled Transport Layer Security) mode. Authenticates LAN clients without
the need for client certificates. Developed by Funk Software and Certicom. Usually supported
by Agere Systems, Proxim and Avaya.
Requires user role: ADMIN, USER
Default value: On
USAGE:
xConfiguration Network n IEEE8021X Eap Ttls:
where
n
: Index that identifies the network. Range: 1..1
Ttls
: Off/On
Off: The EAP-TTLS protocol is disabled.
On: The EAP-TTLS protocol is enabled (default).
66
API Reference Guide
xStatus Appendices
Md5
Ttls
Copyright © 2017 Cisco Systems, Inc. All rights reserved.