Xcommand Systemunit Softwareupgrade; Time Commands; Xcommand Time Datetime Get; Xcommand Time Datetime Set - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xCommand SystemUnit SoftwareUpgrade

Initiate a software upgrade by fetching the software from a given URL. If the server requires
username and password these parameters must be included.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit SoftwareUpgrade URL: "URL" [UserName: "UserName"] [Password:
"Password"] [Forced: Forced]
where
URL: String (0, 255)
The software package location
UserName: String (0, 255)
User name to access the server location, if needed.
Password: String (0, 255)
Password to access the server location, if needed.
Forced: False/True
You can force a system to accept a software upgrade immediately, without giving users
a chance to acknowledge or postpone the update. The default value is True.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

Time commands

xCommand Time DateTime Get

Read the time and date from the system.
Requires user role: ADMIN, USER
USAGE:
xCommand Time DateTime Get

xCommand Time DateTime Set

Set the date and time for the system, if not available from NTP (Network Time Protocol).
Requires user role: ADMIN, USER
USAGE:
xCommand Time DateTime Set [Year: Year] [Month: Month] [Day: Day] [Hour: Hour]
[Minute: Minute] [Second: Second]
where
Year: Integer (2015..2037)
Month: Integer (1..12)
Day: Integer (1..31)
Hour: Integer (0..23)
Minute: Integer (0..59)
Second: Integer (0..59)
155
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.