Xcommand Peripherals Pairing Devicediscovery Start; Xcommand Peripherals Pairing Pair; Xcommand Peripherals Pairing Unpair; Xcommand Peripherals Purge - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xCommand Peripherals Pairing DeviceDiscovery Start

Start device discovery to detect ISDN Links in the same network.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing DeviceDiscovery Start [AutoPairing: AutoPairing]
[DeviceType: DeviceType] [Timeout: Timeout]
where
AutoPairing: On/Off
You can select to automatically pair the detected device to the endpoint. The default is
set to Off.
DeviceType: ISDNLink
Only look for ISDN Link.
Timeout: Integer (3..60)
Set a maximum time for the search from 3 to 60 seconds. The default is set to 10.

xCommand Peripherals Pairing Pair

Pair an ISDN Link to an endpoint.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing Pair MacAddress: "MacAddress"
where
MacAddress: String (1, 1450)
Enter the MAC address for the ISDN Link you wish to pair to the endpoint.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

xCommand Peripherals Pairing Unpair

Unpair endpoint from an ISDN Link, when the two have contact.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing Unpair MacAddress: "MacAddress"
where
MacAddress: String (1, 100)
MacAddress: Enter the MAC address for the ISDN Link you wish to unpair from the
endpoint.

xCommand Peripherals Purge

Force unpair an endpoint from an ISDN Link when a connection has been lost. Note: You must
also unpair the ISDN Link to be able to pair it to another endpoint.
Requires user role: ADMIN, USER
USAGE:
xCommand Peripherals Purge ID: "ID"
where
ID: String (1, 100)
Mac address of the ISDN Link in the format "xx:xx:xx:xx:xx:xx".
139
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.