Xconfiguration Audio Input Line [1; Xconfiguration Audio Input Microphone [1 - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction
xConfiguration Audio Input Line [1..4] Level
Define the level of the audio source on the line input connector.
See the Audio Level table in the Physical Interface Guide for Cisco TelePresence SX80 for a
complete overview of the values represented in dB.
Requires user role: ADMIN, INTEGRATOR
Default value: 10
USAGE:
xConfiguration Audio Input Line
where
n
: Unique ID that identifies the audio line input. Range: 1..4
Level
: Integer (0..24)
Select a value between 0 and 24, in steps of 1 dB.
xConfiguration Audio Input Line [1..4] Mode
Define the mode for the audio input line.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Audio Input Line
where
n
: Unique ID that identifies the audio line input. Range: 1..4
Mode
: Off/On
Off: Disable the Audio Line input.
On: Enable the Audio Line input.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
Level:
n Level
n Mode: Mode
xCommand
xConfiguration Audio Input Microphone [1..8] EchoControl Mode
The echo canceller continuously adjusts itself to the audio characteristics of the room, and
compensates for any changes it detects in the audio environment. If the changes in the audio
conditions are significant, the echo canceller may take a second or two to re-adjust.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Audio Input Microphone
where
n
: Unique ID that identifies the microphone input. Range: 1..8
Mode
: Off/On
Off: Turn off the echo control. Recommended if external echo cancellation or playback
equipment is used.
On: Turn on the echo control. Recommended, in general, to prevent the far end from
hearing their own audio. Once selected, echo cancellation is active at all times.
xConfiguration Audio Input Microphone [1..8] EchoControl NoiseReduction
The system has built-in noise reduction, which reduces stationary background noise, for
example noise from air-conditioning systems, cooling fans etc. In addition, a high pass filter
(Humfilter) reduces very low frequency noise. Noise reduction requires that Audio Input
Microphone [n] EchoControl Mode is enabled.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Audio Input Microphone
NoiseReduction
where
n
: Unique ID that identifies the microphone input. Range: 1..8
NoiseReduction
: Off/On
Off: Turn off the noise reduction.
On: Turn on the noise reduction. Recommended in the presence of low frequency noise.
47
API Reference Guide
xStatus Appendices
n EchoControl Mode: Mode
n EchoControl NoiseReduction:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.