Xconfiguration Audio Input Microphone [1..8] Videoassociation - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration Audio Input Microphone [1..8] VideoAssociation

VideoInputSource
Select the video input connector to associate the audio source with.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
USAGE:
xConfiguration Audio Input Microphone
VideoInputSource
where
n
: Unique ID that identifies the microphone input. Range: 1..8
VideoInputSource
: 1/2/3/4/5
Select the video input connector to associate the audio source with.
xConfiguration Audio Input Microphone [1..8] Level
Define the level of the Microphone input connector.
See the Audio Level table in the Physical Interface Guide for Cisco TelePresence SX80 for a
complete overview of the values represented in dB.
Requires user role: ADMIN, INTEGRATOR
Default value: 58
USAGE:
xConfiguration Audio Input Microphone
where
n
: Unique ID that identifies the microphone input. Range: 1..8
Level
: Integer (0..70)
Select a value between 0 and 70, in steps of 1 dB.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
n VideoAssociation VideoInputSource:
n Level: Level
xCommand
xConfiguration Audio Input Microphone [1..8] Mode
Disable or enable audio on the microphone connector.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Audio Input Microphone
where
n
: Unique ID that identifies the microphone input. Range: 1..8
Mode
: Off/On
Off: Disable the audio input microphone connector.
On: Enable the audio input microphone connector.
xConfiguration Audio Input Microphone [1..8] Type
The microphone connectors are intended for electret type microphones. The microphone
connector can be set to line or microphone mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Microphone
USAGE:
xConfiguration Audio Input Microphone
where
n
: Unique ID that identifies the microphone input. Range: 1..8
Type : Line/Microphone
Microphone: Select Microphone when you have 48 V Phantom voltage and the
pre-amplification is On.
Line: Select Line when you have a standard balanced line input. The phantom voltage
and pre-amplification is Off.
49
API Reference Guide
xStatus Appendices
n Mode: Mode
n Type: Type
Copyright © 2017 Cisco Systems, Inc. All rights reserved.