Xconfiguration Networkservices Https Verifyservercertificate; Xconfiguration Networkservices Https Verifyclientcertificate; Xconfiguration Networkservices Ntp Mode; Xconfiguration Networkservices Ntp Server [1 - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration NetworkServices HTTPS VerifyServerCertificate

When the video system connects to an external HTTPS server (like a phone book server or an
external manager), this server will present a certificate to the video system to identify itself.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration NetworkServices HTTPS VerifyServerCertificate:
VerifyServerCertificate
where
VerifyServerCertificate
: Off/On
Off: Do not verify server certificates.
On: Requires the system to verify that the server certificate is signed by a trusted
Certificate Authority (CA). This requires that a list of trusted CAs are uploaded to the
system in advance.

xConfiguration NetworkServices HTTPS VerifyClientCertificate

When the video system connects to a HTTPS client (like a web browser), the client can be
asked to present a certificate to the video system to identify itself.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration NetworkServices HTTPS VerifyClientCertificate:
VerifyClientCertificate
where
VerifyClientCertificate
: Off/On
Off: Do not verify client certificates.
On: Requires the client to present a certificate that is signed by a trusted Certificate
Authority (CA). This requires that a list of trusted CAs are uploaded to the system in
advance.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration xCommand

xConfiguration NetworkServices NTP Mode

The Network Time Protocol (NTP) is used to synchronize the system's time and date to a refer-
ence time server. The time server will be queried regularly for time updates.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration NetworkServices NTP Mode:
where
Mode
: Auto/Manual/Off
Auto: The system will use an NTP server for time reference. As default, the server
address will be obtained from the network's DHCP server. If a DHCP server is not used,
or if the DHCP server does not provide an NTP server address, the NTP server address
that is specified in the NetworkServices NTP Server [n] Address setting will be used.
Manual: The system will use the NTP server that is specified in the NetworkServices
NTP Server [n] Address setting for time reference.
Off: The system will not use an NTP server. The NetworkServices NTP Server [n]
Address setting will be ignored.
xConfiguration NetworkServices NTP Server [1..3] Address
The address of the NTP server that will be used when NetworkServices NTP Mode is set to
Manual, and when NetworkServices NTP Mode is set to Auto and no address is supplied by a
DHCP server.
Requires user role: ADMIN
Default value: 0.tandberg.pool.ntp.org
USAGE:
xConfiguration NetworkServices NTP Server
where
n
: Unique ID that identifies the NTP server. Range: 1..3
Address
: String (0, 255)
A valid IPv4 address, IPv6 address or DNS name.
77
API Reference Guide
xStatus Appendices
Mode
Address: "Address"
n
Copyright © 2017 Cisco Systems, Inc. All rights reserved.