Xconfiguration Cameras Camera [1..7] Brightness Defaultlevel; Xconfiguration Cameras Camera [N..7] Focus Mode - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration Cameras Camera [1..7] Brightness DefaultLevel

Define the brightness level. Requires the Cameras Camera [n] Brightness Mode to be set to
Manual.
Requires user role: ADMIN, INTEGRATOR
Default value: 20
USAGE:
xConfiguration Cameras Camera n
where
n
: Unique ID that identifies the camera. Range: 1..7
DefaultLevel
: Integer (1..31)
The brightness level.
xConfiguration Cameras Camera [n..7] Flip
This setting applies to Camera [2..7] for single camera systems, and to HDMI [3..7] for dual
camera systems.
With Flip mode (vertical flip) you can flip the image upside down. Flipping applies both to the
self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera n
where
n
: Unique ID that identifies the camera. Range: 2..7 for single camera systems; 3..7 for dual
camera systems
Flip
: Auto/Off/On
Auto: If the camera detects that it is mounted upside down, the image is automatically
flipped. If the camera cannot auto-detect whether it is mounted upside down or not, the
image is not changed.
Off: Display the image on screen the normal way.
On: Display the image flipped upside down. This setting is used when a camera is
mounted upside down, but cannot automatically detect which way it is mounted.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
Brightness DefaultLevel: DefaultLevel
Flip: Flip
xCommand

xConfiguration Cameras Camera [n..7] Focus Mode

Define the camera focus mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera
where
n
: Unique ID that identifies the camera. Range: 2..7 for single camera systems; 3..7 for dual
camera systems
Mode
: Auto/AutoLimited/Manual
Auto: The camera will do continuous auto focusing. It will, more specifically, run auto
focus once a call is connected, after moving the camera (pan, tilt, zoom), and generally
when the camera identifies a change in the scene.
AutoLimited: In most cases this mode will operate the same way as Auto. In some cases
AutoLimited will reduce the focus hunting that may occur. Problematic scenes have
large areas with no or low contrast, for instance a painted wall with no details, or maybe
a partly empty whiteboard. There's a slightly higher chance of background focus with
this mode, compared to Auto.
Manual: Turn the autofocus off and adjust the camera focus manually.
53
API Reference Guide
xStatus Appendices
n Focus Mode: Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.