Gpio Status; Xstatus Gpio Pin [1..4] State; H323 Status; Xstatus H323 Gatekeeper Address - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

GPIO status

xStatus GPIO Pin [1..4] State

Shows the current state of each GPIO pin. The default state is High (+12V). When activated the
state is Low (0V).
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
High/Low
Example:
xStatus GPIO Pin 1 State
*s GPIO Pin 1 State: High
** end
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand

H323 status

xStatus H323 Gatekeeper Address

Displays the IP address of the gatekeeper where the system is registered.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus H323 Gatekeeper Address
*s H323 Gatekeeper Address: "192.0.1.20"
** end

xStatus H323 Gatekeeper Port

Shows the port which is used when connecting to on the gatekeeper.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus H323 Gatekeeper Port
*s H323 Gatekeeper Port: 1719
** end

xStatus H323 Gatekeeper Reason

Shows the reason for rejected registration.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus H323 Gatekeeper Reason
*s H323 Gatekeeper Reason: ""
** end
197
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.