Xcommand Cameras Speakertrack Diagnostics Start; Xcommand Cameras Speakertrack Diagnostics Stop; Xcommand Cameras Speakertrack Whiteboard Activateposition; Xcommand Cameras Speakertrack Whiteboard Alignposition - Cisco MX700 Reference Manual

Application programming interface
Hide thumbs Also See for MX700:
Table of Contents

Advertisement

Cisco TelePresence MX700 and MX800
Introduction

xCommand Cameras SpeakerTrack Diagnostics Start

Starts diagnostics on the SpeakerTrack cameras' tracking.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand Cameras SpeakerTrack Diagnostics Start Tracking:
where
Tracking: On/Off
On: Displays diagnostics from both cameras simultaneously. In this mode the tracking is
determined by who is talking in the room identical to SpeakerTrack's standard behaviour.
Off: Displays diagnostics from one camera at a time. Diagnostics is switched from one
camera to the other in 15 seconds intervals, and camera related diagnostics are shown
for the active camera. Both cameras stay in full wide position. Use Tracking: Off when
you wish to see the tracking diagnostics from one camera at a time.
The default is set to On.

xCommand Cameras SpeakerTrack Diagnostics Stop

Stops diagnostics on the SpeakerTrack cameras.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand Cameras SpeakerTrack Diagnostics Stop
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
Tracking
xCommand
xCommand

xCommand Cameras SpeakerTrack Whiteboard ActivatePosition

Moves the specified camera to the position stored with xCommand Cameras SpeakerTrack
Whiteboard StorePosition.
Requires user role: ADMIN, USER
USAGE:
xCommand Cameras SpeakerTrack Whiteboard ActivatePosition CameraId:
[WhiteboardId: WhiteboardId]
where
CameraId: Integer(1..7)
The ID of the camera that is being positioned.
WhiteboardId: Integer (1..8)
The id set for the camera position used for the snap-to-whiteboard feature. Currently
only id 1 can be used. The default is set to 1.

xCommand Cameras SpeakerTrack Whiteboard AlignPosition

Align the position of the second camera to the first camera's stored position. You must also set
the distance to a whiteboard.
Requires user role: ADMIN, USER
USAGE:
xCommand Cameras SpeakerTrack Whiteboard AlignPosition CameraId:
Distance:
Distance
where
CameraId: Integer(1..7)
The ID of the camera that is being positioned.
Distance: Integer (300..1500)
Set distance to whiteboard in centimeters. Use an accurate measurement for the
feature to work seamlessly.
130
API Reference Guide
xStatus
Appendices
CameraId
CameraId
Copyright © 2017 Cisco Systems, Inc. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx800

Table of Contents