Roomanalytics Status; Xstatus Roomanalytics Peoplepresence; Security Status; Xstatus Security Fips Mode - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

RoomAnalytics status

xStatus RoomAnalytics PeoplePresence

Shows if there are people present in the room or not. It takes a minimum of two minutes to
detect whether people are present or not in the room. After the room gets vacant, it may take
up to two minutes for the status to change. This feature is based on ultrasound. The video
system will not keep record of who was in the room, only whether or not there are people
present in the room.
Requires user role: ADMIN, USER
Value space of the result returned:
Yes/No/Unknown
Example:
xStatus RoomAnalytics PeoplePresence
*s RoomAnalytics PeoplePresence: No
** end
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand

Security status

xStatus Security FIPS Mode

Shows the FIPS mode status.
Requires user role: ADMIN, USER
Value space of the result returned:
On/Off
Example:
xStatus Security FIPS Mode
*s Security FIPS Mode: Off
** end

xStatus Security Persistency CallHistory

Shows whether call history logging is set to persistent or non-persistent mode. Persistent is the
default mode.
Requires user role: ADMIN, USER
Value space of the result returned:
NonPersistent/Persistent
Example:
xStatus Security Persistency CallHistory
*s Security Persistency CallHistory: Persistent
** end
214
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.