Download  Print this page

Cisco MX200G2 Manual

In-room control on touch 10
Hide thumbs

Advertisement

Table of contents
Introduction
Create a user interface
API for in-room control
Widgets
Command reference
In-Room Control on
Troubleshooting
Touch 10
Tips and tricks
User Interface Extensions
Examples
Cisco TelePresence
In-Room Control on Touch 10
for Cisco TelePresence
MX200 G2, MX300 G2,
MX200 G2, MX300 G2,
MX700, MX800,
SX10, SX20, SX80
MX700, MX800,
Collaboration Endpoint
software version CE8.2
SX10, SX20, SX80
D15358.02 - JULY 2016
www.cisco.com
© 2016 Cisco Systems, Inc.
All rights reserved.
1
CE8.2
JULY 2016

Advertisement

Table of Contents
loading

  Also See for Cisco MX200G2

  Summary of Contents for Cisco MX200G2

  • Page 1 Cisco TelePresence MX200 G2, MX300 G2, MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 MX700, MX800, Collaboration Endpoint software version CE8.2 SX10, SX20, SX80 D15358.02 - JULY 2016 www.cisco.com CE8.2 © 2016 Cisco Systems, Inc. All rights reserved. JULY 2016...
  • Page 2: Table Of Contents

    Create an In-room Control panel ............9 telepresence/docs API for programming in-room controls ..........14 Widgets We recommend that you visit the Cisco web site regularly for updated versions of this guide. Widgets ....................20 The Widget Identifier ................ 20...
  • Page 3 Troubleshooting Tips and tricks Examples Introduction In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 4 CE8.2 or later. Sometimes referred to as video device. systems. Control system. Third-party control system with hardware drivers for Since both the Cisco video system and the other peripherals now are peripherals, for example Crestron, AMX, Apple HomeKit, or Android. Create a user interface controlled from the Touch 10 user interface, you will get a consistent Touch 10.
  • Page 5 In-room controls Table of contents You need a Cisco video system with a Touch 10 user interface, and a third-party control system, for example Crestron, AMX. Global entry icon Introduction Introduction example The video system’s API, referred to as the xAPI, is the link between the video system and the control system.
  • Page 6 Use the in-room control editor to create the user interface and to apply it to MX200 G2, MX300 G2, MX700, MX800, the video system SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 7 Offline in-room control editor in-room control MX700, MX800, panel to file SX10, SX20, SX80 Collaboration Endpoint In-room control editor launched from the video system's web interface software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 8 MX200 G2, MX300 G2, and In-Call. Each set may MX700, MX800, contain multiple pages. To SX10, SX20, SX80 create a panel, click here. Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 9 Start or continue the design of an in-room control panel Tips and tricks Examples In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 10 Widget library Global in-room control, www.cisco.com but the principles apply to © 2016 Cisco Systems, Inc. all three sets of in-room The in-room control editor. Widgets from the widget library are placed in a four-column grid. All rights reserved. controls.
  • Page 11 Collaboration Endpoint Drag a page, row, software version CE8.2 or widget, and drop it in D15358.02 - JULY 2016 a new position. Drop it outside the design panel www.cisco.com to delete it. © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 12 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 Which in-room control icons (entry icons) used is defined by the Panel icon setting, as shown on the previous page. www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 13 Tips and tricks Examples API for in-room control In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 14 API Tips and tricks guides. Examples In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 15 See the Command reference chapter for an overview of all relevant MX700, MX800, events, commands and statuses for in-room control. SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 16: D15358.02 - July

    CE8.2 </UserInterface> D15358.02 - JULY 2016 </Event> www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved. Two event versions that a control system can register to: one suited for terminal output mode, the other for XML output mode...
  • Page 17: In-Room Controls

    <LayoutUpdated item="1"/> </Widget> Examples </Extensions> </UserInterface> </Event> In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 18: Widgets

    MX200 G2, MX300 G2, the user can MX700, MX800, see in the SX10, SX20, SX80 room Collaboration Endpoint software version CE8.2 Message flow—turn on the lights using the wall control D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 19 Cisco TelePresence Description of the user interface elements and their associated MX200 G2, MX300 G2, MX700, MX800, events and commands SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 20: Toggle Button

    The maximum number of characters is 255. In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 21: Slider

    D15358.02 - JULY 2016 www.cisco.com xCommand UserInterface Extensions Widget SetValue The visual appearance of the button changes immediately when you © 2016 Cisco Systems, Inc. WidgetId: "togglebutton" Value: "on" All rights reserved. tap it. However, the control system must always send a...
  • Page 22 UserInterface Extensions Widget SetValue WidgetId: "slider" The visual appearance of the slider changes immediately when you © 2016 Cisco Systems, Inc. Value: "98" All rights reserved. tap or slide it. However, the control system must always send a...
  • Page 23 D15358.02 - JULY 2016 between the spinner's increment and decrement buttons. www.cisco.com Use the command to add or update the text between the © 2016 Cisco Systems, Inc. SetValue xCommand UserInterface Extensions Widget SetValue WidgetId: "spinner" All rights reserved. two buttons.
  • Page 24: Button With Custom Text

    D15358.02 - JULY 2016 active state). www.cisco.com Use the command to highlight or not the button in the user © 2016 Cisco Systems, Inc. SetValue xCommand UserInterface Extensions Widget SetValue WidgetId: "button" All rights reserved. interface. A value of will highlight the button, and a value of "active"...
  • Page 25: Button With Symbol

    Highlight the button with WidgetId = "symbol" (set it in D15358.02 - JULY 2016 active state) www.cisco.com © 2016 Cisco Systems, Inc. Use the command to highlight or not the button in the user SetValue xCommand UserInterface Extensions Widget SetValue WidgetId: "symbol"...
  • Page 26 SetValue xCommand UserInterface Extensions Widget SetValue www.cisco.com command to the video system when one of the buttons are tapped. © 2016 Cisco Systems, Inc. WidgetId: "groupbutton" Value: "one" This ensures that the status is updated accordingly. All rights reserved. xCommand UserInterface Extensions Widget UnsetValue...
  • Page 27: Text Box

    WidgetId: "textbox" Value: "The projector is warming up." In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 28: Events

    Syntax and semantics for events, commands, and statuses, that are used MX200 G2, MX300 G2, MX700, MX800, with the user interface extensions SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 29: Commands

    UserInterface Extensions Widget [n] Value ........33 Tips and tricks Examples In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 30 MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 31 CE8.2 finger out of the widget before releasing it). D15358.02 - JULY 2016 Clicked: Sent when a widget is clicked (pressed and released www.cisco.com without moving the finger out of the widget). © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 32: Statuses

    Cisco TelePresence : String (0, 40) WidgetId MX200 G2, MX300 G2, MX700, MX800, The unique identifier for the widget. SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 33: D15358.02 - July

    *s UserInterface Extensions Widget 6 Value: “Projector is ready” MX700, MX800, *s UserInterface Extensions Widget 6 WidgetId: “textfield” SX10, SX20, SX80 ** end Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 34 In-Room Control on Touch 10 for Cisco TelePresence Help to identify the source of an error MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 35: Troubleshooting

    In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved. Send command to Widget status update widget...
  • Page 36 Widget ID Tips and tricks Examples In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 37 Tips and tricks Examples Tips and tricks In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 38 If tilted all the way already, moves the D15358.02 - JULY 2016 blinds slightly. www.cisco.com © 2016 Cisco Systems, Inc. Long press on a direction arrow starts moving the blind that direction, All rights reserved. doesn’t stop until all the way up / down.
  • Page 39 Tips and tricks Tips and tricks Examples In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 40 In-Room Control on Touch 10 for Cisco TelePresence For inspiration and guidance on best practices MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 41 Troubleshooting Tips and tricks Examples Examples In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 42 • When the user selects one of the options in the group button (a www.cisco.com light preset), set the sliders and toggle buttons accordingly. © 2016 Cisco Systems, Inc. • If the lights are changed away from a preset, for instance by All rights reserved.
  • Page 43 Then no separate stop button is necessary. In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 44 Troubleshooting Tips and tricks Examples Examples In-Room Control on Touch 10 for Cisco TelePresence MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80 Collaboration Endpoint software version CE8.2 D15358.02 - JULY 2016 www.cisco.com © 2016 Cisco Systems, Inc. All rights reserved.
  • Page 45: Cisco Contacts

    All rights reserved. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco. com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and...

This manual is also suitable for:

Mx800Mx700Mx300g2Sx20Sx80Sx10