Xcommand Provisioning Extensionmobility Login; Xcommand Provisioning Extensionmobility Logout; Proximity Commands; Xcommand Proximity Services Activate - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xCommand Provisioning ExtensionMobility Login

Login command for the Extension Mobility service. You log in to the Extension Mobility service
with a user name (UserId) and pin code (Pin). The user name and pin code are set up in CUCM.
CUCM also supports multiple profiles for a user.
If you, for a user that has multiple profiles, submit a login command with only user name and
pin code, CUCM will send a list of available profiles back to the video system. Then the video
system will create corresponding ExtensionMobilityProfileSelection Profile events, so that a
new login command, which contains the Profile parameter in addition to the user name and pin
code, can be submitted.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning ExtensionMobility Login UserId: "UserId" Pin: "Pin"
[Profile: "Profile"]
where
UserId: String (1, 255)
A valid user name, as set up in CUCM.
Pin: String (1, 255)
A valid pin code for the user, as set up in CUCM.
Profile: String (1, 255)
A valid profile for the user, as set up in CUCM. This parameter applies only if the user
has multiple profiles.

xCommand Provisioning ExtensionMobility Logout

This command will log you out of your Extension Mobility profile.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning ExtensionMobility Logout
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

Proximity commands

xCommand Proximity Services Activate

Reactivate the Proximity services that were deactivated with xCommand Proximity Services
Deactivate.
Requires user role: ADMIN, USER
USAGE:
xCommand Proximity Services Activate

xCommand Proximity Services Deactivate

This command deactivates all proximity services on the endpoint. To reactivate proximity
services use the command xCommand Proximity Services Activate.
Requires user role: ADMIN, USER
USAGE:
xCommand Proximity Services Deactivate
146
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.