Xconfiguration Networkservices Snmp Systemlocation; Xconfiguration Networkservices Ssh Mode; Xconfiguration Networkservices Telnet Mode; Xconfiguration Networkservices Welcometext - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xConfiguration NetworkServices SNMP SystemLocation

Define the name of the Network Services SNMP System Location.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration NetworkServices SNMP SystemLocation: "SystemLocation"
where
: String (0, 50)
SystemLocation
The name of the SNMP system location.

xConfiguration NetworkServices SSH Mode

SSH (or Secure Shell) protocol can provide secure encrypted communication between the
codec and your local computer.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration NetworkServices SSH Mode:
where
: Off/On
Mode
Off: The SSH protocol is disabled.
On: The SSH protocol is enabled.
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration xConfiguration
Mode
xCommand

xConfiguration NetworkServices Telnet Mode

Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration NetworkServices Telnet Mode:
where
: Off/On
Mode
Off: The Telnet protocol is disabled. This is the factory setting.
On: The Telnet protocol is enabled.

xConfiguration NetworkServices WelcomeText

Choose which information the user should see when logging on to the codec through Telnet/
SSH.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration NetworkServices WelcomeText:
where
: Off/On
WelcomeText
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.
79
API Reference Guide
xStatus Appendices
Mode
WelcomeText
Copyright © 2017 Cisco Systems, Inc. All rights reserved.