Cisco TelePresence MX200 G2 Quick Reference Manual

Calling someone
Tap Dial, as outlined.
Key in the number, as
outlined.
When the number has
been keyed in, tap the
Call key to place the
call.

Keyboard layout

Tap as outlined to
go betwen dialpad and
alphanumerical keyboard.
D1507706 Quick Reference Guide MX200 G2/MX300 G2/MX700/MX800/SX10/SX20 SX80 TC7.3 Dec. 2015
Using the list of contacts to call
To search for someone, tap here to invoke the virtual keyboard
and then key in the name or number. Matches will appear as you
type. All three lists will be examined for possible matches.
If you are going to
look in a specific
list only, tap the
corresponding
tab first.
Any matches will
appear here. Tap to
select an entry. The
selected entry will
appear on a blue
background.
To locate an entry, you may also scroll
through a list as you would do on a
smartphone. Tap to select an entry.

Initiating a video conference (optional feature)

Method A (Multisite):
In a call Search or dial in the usual
tap Add. way.
Method B (MultiWay/CUCM):
In a call Place a new call in the
tap Add. usual way.
Quick Reference Guide
Cisco TelePresence MX200 G2/MX300 G2/MX700/MX800/SX80
When an entry has been located and
selected the Call menu will appear.
Tap Call to place the call. There are
some options available. These are always
context sensitive, which means that
meaningless options are not shown. For
example Add to Favorites is not available
for entries already residing in the list of
Repeat the procedure to
add more participants.
Tap Add to turn Tap END to terminate the
the current call into a conference.
conference.
Repeat the procedure to
add more participants.
Tap Merge to Tap END to terminate the
turn the current conference.
call into a conference.
Favorites.