Networkservices Upnp Mode; Networkservices Upnp Timeout; Networkservices Welcometext; Networkservices Xmlapi Mode - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set

Introduction

NetworkServices UPnP Mode

Fully disable UPnP (Universal Plug and Play), or enable UPnP for a short time period after
the video system has been switched on or restarted.
The default operation is that UPnP is enabled when you switch on or restart the video
system. Then UPnP is automatically disabled after the timeout period that is defined in the
NetworkServices UPnP Timeout setting. Use the video system's web interface to set the
timeout.
When UPnP is enabled, the video system advertises its presence on the network. The
advertisement permits a Touch controller to discover video systems automatically, and
you do not need to manually enter the video system's IP address in order to pair the Touch
controller.
Requires user role: ADMIN
Default value: On
Value space: <Off/On>
Off: UPnP is disabled. The video system does not advertise its presence, and you have
to enter the video system's IP address manually in order to pair a Touch controller to the
video system.
On: UPnP is enabled. The video system advertises its presence until the timeout period
expires.

NetworkServices UPnP Timeout

Define for how many seconds UPnP shall stay enabled after the video system is switched
on or restarted. The NetworkServices UPnP Mode setting must be On for this setting to
take any effect.
Requires user role: ADMIN
Default value: 600
Value space: <0..3600>
Range: Select a value between 0 and 3600 seconds.
D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration Peripherals Maintenance

NetworkServices WelcomeText

Choose which information the user should see when logging on to the codec through
Telnet/SSH.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.

NetworkServices XMLAPI Mode

Enable or disable the video system's XML API. For security reasons this may be disabled.
Disabling the XML API will limit the remote manageability with for example TMS, which no
longer will be able to connect to the video system.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The XML API is disabled.
On: The XML API is enabled (default).
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
108
Administrator Guide
System settings System settings Appendices