Xstatus Network 1 Cdp Primarymgmtaddress; Xstatus Network 1 Cdp Sysname; Xstatus Network 1 Cdp Sysobjectid; Xstatus Network 1 Cdp Version - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xStatus Network 1 CDP PrimaryMgmtAddress

Returns the management address used to configure and monitor the switch the endpoint is
connected to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end

xStatus Network 1 CDP SysName

Returns the SysName as configured in the switch the endpoint is connected to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end

xStatus Network 1 CDP SysObjectID

Returns the SysObjectID as configured in the switch the endpoint is connected to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand

xStatus Network 1 CDP Version

Returns information about the software release version the switch is running.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network 1 CDP Version
*s Network 1 CDP Version: "Cisco IOS Software, C3560CX Software (C3560CX-
UNIVERSALK9-M), Version 15.2(3)E, RELEASE SOFTWARE (fc4)*Technical Support:
http://www.cisco.com/techsupport*Copyright (c) 1986-2014 by Cisco Systems,
Inc.*Compiled Sun 07-Dec-14 13:15 by prod _ rel _ team"
** end

xStatus Network 1 CDP VoIPApplianceVlanID

Identifies the VLAN used for VoIP traffic from the endpoint to the switch. For more information
see documentation of the IEEE 802.1Q protocol.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP VoIPApplianceVlanID
*s Network 1 CDP VoIPApplianceVlanID: "300"
** end

xStatus Network 1 CDP VTPMgmtDomain

Returns the switch's configured VTP management domain name-string.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP VTPMgmtDomain
*s Network 1 CDP VTPMgmtDomain: "anyplace"
** end
205
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.