Xcommand Audio Soundsandalerts Ringtone Play; Xcommand Audio Volume Decrease; Xcommand Audio Volume Increase; Xcommand Audio Volume Mute - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xCommand Audio SoundsAndAlerts Ringtone Play

Play one of the available ringtones. Use the xCommand Audio SoundsAndAlerts Ringtone List
command to get a list of the available ringtones.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand Audio SoundsAndAlerts Ringtone Play RingTone: "RingTone"
where
RingTone: String (1, 100)
The name of the ringtone.

xCommand Audio Volume Decrease

Decrease the volume on the endpoint. By default, the volume is increased by 5 steps (each
step is 0.5 dB). Use the Steps parameter if you want to override the default behavior.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Decrease [Steps: Steps]
where
Steps: Integer (1..10)
Choose the number of steps to decrease the volume with. One step is 0.5 dB. The
default is set to 5.

xCommand Audio Volume Increase

Increase the volume on the endpoint. By default, the volume is increased by 5 steps (each step
is 0.5 dB). Use the Steps parameter if you want to override the default behavior.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Increase [Steps: Steps]
where
Steps: Integer (1..10)
Choose the number of steps to increase the volume with. One step is 0.5 dB. The
default is set to 5.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

xCommand Audio Volume Mute

Mute the volume on the endpoint.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Mute

xCommand Audio Volume Set

Set the volume on the endpoint to a specified level.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Set Level:
where
Level: Integer (0..100)
Select the gain level. 70 equals 0 dB gain, and 100 equals 15 dB gain.

xCommand Audio Volume SetToDefault

Set the volume to the default level that is defined in the xConfiguration Audio DefaultVolume
setting.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume SetToDefault

xCommand Audio Volume ToggleMute

Toggle the loudspeaker between muted and unmuted.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume ToggleMute
115
API Reference Guide
xStatus Appendices
Level
Copyright © 2017 Cisco Systems, Inc. All rights reserved.