52 Setup
Set up the Braun ThermoScan® PRO thermometer
If your system is configured for the Braun ThermoScan thermometer, follow these setup
instructions.
1. Remove the thermometer from the package. Then open a box of probe covers and
place it in the dock.
2. Remove the thermometer cover, insert the battery, replace the thermometer cover,
then place the thermometer in the dock.
2
3. Charge the Braun thermometer for 24 hours before first use.
4. To switch from Celsius to Fahrenheit, see the thermometer manufacturer's
directions for use.
Connect AC power
The wall system uses both battery and AC power. After completing all other setup
activities, you can apply power to the wall system.
1
2
Welch Allyn Connex
1
®
Devices