Welch Allyn Spot Vision Screener Quick Start Manual

Charging the Vision Screener
1. Connect the provided DC cord set and power supply/
charger together.
2. Locate the DC power connector on
the Vision Screener and connect the
power supply/charger. The DC power
connector easily inserts
into the Vision Screener.
CAUTION Using force to
connect the power charger
can damage the device and
will void the warranty.
3. Plug the DC power cord into an available wall outlet to charge
the device.
Note: The device needs to be charged for 4 hours before use.
Powering on the Vision Screener
To turn the Vision Screener on, press and release the power
button located below the Welch Allyn logo (start-up process
takes approximately 30 seconds). Once powered on, the device
displays the Home Screen.
Controls, Display Window, and
Connections
1
2
3
4
5
6
1. Ambient light sensor
2. LCD screen
3. Neck strap mount
4. USB port
5. Battery charge green
LED indicator (Flashing)
or charged (Continuous)
6. Tripod mount
3
7
8
9
7. AC power connector
8. Power button
9. Wrist strap mount
10. Range finder
11. Front glass
12. Speaker
Spot Vision Screener
TM
Quick Start Guide
Device Home Screen
1 2
1. Queue – View, select or search for queued subjects from a list
to begin the screening process.
2. History – View already screened subjects (completed records).
3. Tools – A variety of options to customize the vision screener.
4. The Start button allows you to:
• Enter subject information such as ID, First and Last
Name, Gender and Date of Birth (DOB)/Age (Required)
• Find queued subjects (exact match on the ID screen)
• Begin the screening process (Binocular and
Monocular available)
• Review and print screening results
10
5. Battery status –
• Battery Charging
11
• Battery charge status
12
6. Age Range – To begin instant screening, with no personal
subject data, select an age range of the subject from the Home
screen. You can enter subject data after the screening
if desired.
3 4
5
6
1