Replace The Printer Paper (Connex Vsm) - Welch Allyn Connex VSM 6000 series Directions For Use Manual

180 Maintenance and service

Replace the printer paper (Connex VSM)

The printer is located on the top of the monitor. Follow these steps to replace the roll of
printer paper:
1. Grasp the two tabs and pull up to open the printer door.
2. Remove the empty core.
3. Insert a new roll of paper.
Note
4. Advance the end of the roll past the roller so that it extends past the printer door, as
shown.
5. With one hand, pull lightly on the paper to take up any slack. With the other hand,
close the printer door by pushing it down and into place until it clicks.
Be certain that the paper does not catch in the printer door.
WARNING Hot surface. Do not touch the printer mechanism.
The paper roll must be installed so that it unwinds from the
bottom of the roll, as illustrated. If the paper roll is not
installed correctly, the printer will not print properly.
®
Welch Allyn Connex Devices