Startup; Power - Welch Allyn Connex VSM 6000 series Directions For Use Manual

Startup

Power

The device operates in one of two power states:
• Device powered on. The device is operating on battery power or AC power. You can
utilize the device's features, and the display is active.
• Sleep (Display power-saving) mode. The device is operating on battery or AC power,
but the display is off to conserve power. Settings for this mode can be changed in
the Display tab in Advanced settings.
Note
The following actions return the display to the active state:
• Touching the screen
• Removing the temperature probe from the probe well
• Attaching the SpO2 sensor to a patient
• Connecting the patient movement cable and bed sensor (sensing unit) to the device
• Attaching a sampling line to a patient
•
Pressing
Power on/Display power-saving button
The Power on/Display power-saving button
the following functions:
Battery-powered accessories connected to the device
continue to charge while the device is in this mode and
connected to AC power.
, located on the device housing, performs
55